OVERVIEW
The Ranial Cognit IoT Edge 2022 connects your sensors and other devices to the cloud. This allows you to view status and control connected devices from a customizable web portal from any internet connected location.
SPECIFICATIONS
Compute Module
- 64-Bit, Quad-core ARM V.8 A72 (Broadcom BCM2711) SoC , @ 1.5 GHz
- Modern Heat Dissipation Management
- Maximum clock speed limited to 1.5 Ghz for enhanced thermal range
- 4/8GB LPDDR4 3200 SD RAM with ECC
- WiFi – 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless
- BT – 5.0, BLE
- Gigabit Ethernet – PHY supporting IEEE 1588 – RJ 45 Connector
ENVIRONMENTAL
- − Ambient Operating Temperature Range: -20°C to + 75°C*
*Note: depending on processor workload, CPU throttling may occur above 50°C ambient
STORAGE MEDIUM
- 16GB Flash onboard
INPUT Electricals
- Voltage: 12 Volt DC Input
- Power: 24Wminimum, 30Wrecommended. Additional power may be needed for installed USB devices or expansion cards (mPCIe or HATs). Be sure to verify
the power supply high temperature derating for your application.
DIMENSIONING & MOUNTING
- Dimensions: 160mm W x 90mm D x 43mm H (55mm H with included expansion ring)
- Weight: 0.4kg
- Mounting: Desktop, Wall
FRONT PANEL LEDS
7 LED Indicators
| LED No. | Colour | Indication/Function |
|---|---|---|
| 1 | Red | ADC |
| 2 | Red | TCP |
| 3 | Red | GPS |
| 4 | Red | CAN |
| 5 | Red | GSM |
| 6 | Red | LORA |
| 7 | Red | RS485 |
HARDWARE WATCHDOG TIMER (WDT)
- timeout -12 Sec
REAL-TIME CLOCK (RTC) WITH BATTERY BACKUP
- real-time clock with backup battery – Model CR-2032
EXTERNAL CONNECTIONS
DC-INPUT
- 12V DC
- Recommended Wire: 18-24AWG Solid or 18-22AWG Stranded
- Install Protective Earth Wire
| Symbol | Signal Name |
|---|---|
| + | 12V DC |
| ⏚ | Protective Earth GND |
| - | 0V (GND) |
ETHERNET PORT
- 10/100/1000 Base-T
- Link / Activity LEDs
DUAL USB PORTS
- USB 2.0 High-Speed
- 5V @ 900mA Output, shared among all USB ports
DISPLAY CONNECTOR
- HDMI Compatible
Ethernet RJ45 for MODBUS TCP (PN – ENC28J60)
- 1 N 10/100/1000 RJ45 Ethernet
RS485 for MODBUS RTU (PN – LTC485)
- 2 N RS485 for MODBUSRTU
8 channel ADC (0 to +5V input)
10 channel GPIO (0 to +5V Input / Output )
1 N CAN BUS interface (PN – MCP2515)
1 N GSM/GPRS Communication Unit (PN – Xbee LTE) with Antenna
1 N GPS Receiver Unit (PN – GPS-BEE) with Antenna
1 N LoRAWAN Communication Unit (PN – LN610) with Antenna
1 N 40 pin Header
Accessible Ports
| USB | 2 |
| Micro USB | 1 |
| SD Card Slot | 1 |
| TCP | 4 |
| HDMI | 2 |
| RS232 | 1 |
| RS485 | 1 |
| GPIO | 10 Pins |
| ADC | 8 Pins |
| CAN | 1 |
Safety Instructions:
- Do not expose to water or moisture, or place on a conductive surface whilst in operation.
- Do not expose to heat from any source; the Board is designed for reliable operation at normal ambient temperatures.
- Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
- Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimize the risk of electrostatic discharge damage.
COMPLIANCE:
CLASS B
- FCC / IC / CE Class B Compliance
- RoHS/WEEE
Simplified EU Declaration of Conformity
Hereby, Ranial Inc., declares that SmartEdge IoT Gateway is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: element14.com/gateway
| Frequency Range | RF Output Power |
| 2402 - 2480 MHz | 0.0051 Watts |
| 2412 - 2462 MHz | 0.2449 Watts |
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
- Unique Identifier Trade Name: Cognit IoT Edge – 2022 V1.0.Model No.: RAN-CIoT-E22
- Responsible Party – U.S. Contact Information Ranial Systems
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
➢ DER / Microgrid Application supports Automated / Supervisory charge / discharge
➢ Economic dispatch
➢ Automated renewable Ramping / Smoothening
➢ Condition based Monitoring
➢ Dynamic Optimization of resource
➢ Market Participations
➢ Configurable Autonomous Control & Protection
➢ Intelligent Maximum Power Point Tracking